windowliner.blogg.se - Blue lagoon 1x1 cw13

Tiles larger than 3x3 should be back-buttered with a thin continuous layer of the thin set applied with the flat side of the trowel.

Apply as much adhesive as can be covered within 10-15 minutes.ģ/16" or 1/4" square notch trowel should be used when installing our glass material and ridges should be smoothed down with the flat side of the trowel prior to fixing the tiles in the mortar bed.

To avoid affecting the color of the tile, white thinset such as Bostik Glass-Mate is strongly recommended for all installations.

Plywood should be avoided, since the wood will warp with the added moisture and it will also be less waterproof, even after tiling. Cement board, concrete or drywall is best, as these surfaces can handle the moisture of the tiling process.

Before you start tiling, make sure that whatever surface the tiles are being installed to will be strong and structurally sound.

*Always use appropriate personal protective safety equipment when handling, drilling, cutting or grinding glass tile such as (but not limited to) eye, ear and hand protection. This is not a factory defect or deficiency of any kind in the material and should be expected by the end consumer. Due to the nature of the material and production process it may be possible to see through the clear glass on certain angles which can appear as a lighter line along the edges of the glass. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.

We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern.Please follow best practice instructions found in the Tile Council of North America (TCNA) 09300 Handbook for specific installation types. These instructions are meant to be a guide for most installations, under normal conditions.

All material is sorted according to ANSI standard A137 size tolerances and packaging is clearly marked with caliber and shade/tone/dye-lot. The pigments and glass are made from natural minerals and as such the firing process will cause slight variations in shades and size.

The multi-layered protective coating is fired with the tile and ensures that the thin-set mortars will not be visible after installation. The back of the glass tile is coated with the desired pigment(s) and a white protective coating visible from the back of the tile. This material is made of clear and transparent glass. Please refer to and install our products to the standards set by the TCNA. Wondering how this Swim tile will appear in your pool?Įxplore the effect Swim tiles have on water color below. While specifically designed for pool applications, these tiles can be easily incorporated anywhere, indoors and out. Swim also offers a dot glue system on the edges of the tiles allows for secure adhesion ideal for underwater installations and curved surfaces. These Spanish-made tiles are created from the colorful upcycled remnants of a local glass factory where they are reimagined into new molten glass tiles, offering a highly sustainable tiling solution with 98% recycled content. Assembled with dot backing rather than paper or mesh, this mosaic tile brings immense flexibility, allowing greater control in its application.Ībout The Collection: Make a splash with our Swim Collection, a diverse line of recycled glass mosaics where each tile embodies an enchantingly serene quality that pulls you in and transports you to your fantasy resort, from a sleek and mysterious iridescent black reflecting the midnight sea to a crisp turquoise as fresh as the Caribbean. Combining a modern iridescent gleam with striking purple and blue hues, these glass mosaic tiles create a stylish and effortless look. About The Tile: Vibrant, rich, and colorful: the Swim Blue Lagoon 1” x 1” Glass Mosaic tiles are inspired by the vivid light cast on California's beaches, evoking memories of the violet sunsets of the Pacific.